Lindberg 1200 °C Box Furnaces, Heavy Duty

Heavy-Duty 1200°C Box Furnaces feature a unique internal construction and outer shell design which reduces external surface temperatures without compromising interior temperature uniformity. Requires independent control console, model No. CC58114C (ordered separately).

General Features

  • Individual heating elements at chamber top, bottom and sides for uniform heat distribution
  • Swing down door provides convenient loading platform.
  • Helically coiled, high temperature alloy wire elements for extended service life
  • Unique Moldatherm© ceramic fiber insulation to allow rapid heat-up, recovery and cool-down rates
  • High temperature insulation in vestibule and floating plug door to minimize heat loss and improve temperature control
  • Spring-loaded door holds door securely shut; door rests in horizontal position when open
  • Sight glass for convenient observation of heated load during operation
  • Refractory plate heating unit (Model BF51442C)
  • Heating element imbedded in Moldatherm© insulation (Model BF51542C)
  • Rugged, heavy-duty InconelTM hearth plate supports load and protects the furnace from damage due to spillage
  • Long-life Platinel© II thermocouple with 10' compensated lead wire and polarized plug

Optional RS485 Digital Communications Port

  • RS485 Digital communications port available as an option. Allows controller to be connected to a PC for remote monitoring and control of the furnace. Up to 30 units can be connected to one PC.

1200° Box Furnace, Heavy Duty - With Refractory Plate Heating Element, Temperature Range 100°C to 1200°C

Model IndependentController Electrical Watts Interior DimensionsW x F-B x H in” Exterior DimensionsW x F-B x H in” Ship Weightlbs
BF51442C CC58114C 208/240V,
50/60 Hz
4800 7.5" x 14" x 5.25" 20" x 20" x 24.5" 145
With Moldatherm® Heating Element (Four Sides), Temperature Range 100°C to 1200°C  
BF51542C CC58114C 208/240V,
50/60 Hz
6200 10.5" x 14.5" x 9.5" 28" x 31" x 28.5" 335

Note: Required power cord, hardwiring and interconnecting wiring are not included.

CONTROLLERS

CC58114C1200°C Digital, Single Set Point Controller-
Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack. Includes microprocessor-based PID control (proportional, integral, derivative), single segment, single set point, 1 ramp to set point. Built-in adjustable high limit over temperature protection. Simultaneous LED display of actual temperature vs. set point. May be configured to display temperature in either °C or °F.

Option P 1200°C Digital 16 Segment Programmable Controller-
Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack. Includes microprocessor-based PID control (proportional, integral, derivative), 1 program with 16 segments for 8 ramps (up and down) and 8 dwells (timed holds). Built-in adjustable high limit over temperature protection. Simultaneous LED display of actual temperature vs. set point. May be configured to display temperature in either °C or °F.

Option B Over Temperature Control (OTC)-
Adjustable digital over temperature control, factory installed on selected control consoles with “B” designation; see chart. Protects furnace and load in the event of primary control circuit failure. Overrides main controller, assumes temperature control and shuts off power to furnace if high limit is reached. Manual re-set required for safety. Operates via magnetic contacts through signal from independent thermocouple.

Horizontal Side Swing Door, 2.0 cu ft (55.3 liters),
Temperature Range 100°C to 1200°C

Model Digital With Program
-mer
With Overtemp Control Electrical Amps Exterior Dimensions H x F-B x W in” Ship Weight lbs
CC58114C     208/240V,
50/60 Hz
30 10" x 19" x 14" 40
CC58114PC   208/240V,
50/60 Hz
30 10" x 19" x 14" 40
With Over Temperature Control
CC58114BC   208/240V,
50/60 Hz
30 10" x 19" x 14" 40
CC58114PBC 208/240V,
50/60 Hz
30 10" x 19" x 14" 40

Note: Required power cord, hardwiring and interconnecting wiring are not included.


Contact One Of Our Sales Representative Today
to inquire about a quote from Pacific Combustion or call us today at 800.342.4442


Competitive Pricing

Personalized Service

Fast Response Times