Lindberg 1200 °C Crucible Furnace, Top Loading

1200°C Crucible furnaces are ideal for use in ceramics, electronics, glass, metallurgy and superconductor materials research. These models require independent controllers (ordered separately).

General Features:

  • Requires independent controller (ordered separately, see chart)
  • Unitized heating and insulation element with helical wire coil imbedded in Moldatherm® insulation for maximum heat transfer to the work load
  • Cover plug with Moldatherm® insulation and handle for safe removal
  • Moldatherm® insulation protects vestibule, improves energy efficiency
  • Platinel® II thermocouple with 10"compensated lead wire and polarized plug for long life and accurate temperature measurement
  • Moldatherm® ceramic fiber hearth plate supports load and protects furnace from spillage

 

1200°C Crucible Furnace, temperature range 100°C to 1200°C

Model Volts, Hz Watts Temp Controller Top Opening ID in” Chamber Depth In” Exterior Dimen. H x F-B x W in” Ship Weight
CF56622C 208/204V, 50/60 Hz 1700 1200°C CC58114C 5" 8" 16" x 15" x 15" 52
CF56822C 208/240V, 50/60Hz 2600 1200°C CC58114C 7.5" 8" 19" x 20" x 20" 105

Crucibles: These furnaces are designed for use with a variety of crucibles including alumina, mullite, quartz and metallic. (Crucible not supplied with furnaces.)

Note: Power cord and interconnecting wiring customer supplied.

CONTROLLERS

1200°C Digital, Single Set Point Controller
Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack. Includes microprocessor-based PID control (proportional, integral, derivative), single segment, single set point, 1 ramp to set point. Built-in adjustable high limit over temperature protection. Simultaneous LED display of actual temperature vs. set point. May be configured to display temperature in either °C or °F.

1200°C Digital Single Program, Multiple Segment Programmable Controller
Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack. Includes microprocessor-based PID control (proportional, integral, derivative), single program with multiple segments for ramp (up and down) and dwell (timed hold) temperature control. See page 35 for more information. Built-in adjustable high limit over temperature protection. Simultaneous LED display of actual temperature vs. set point. May be configured to display temperature in either °C or °F.

Option B Over Temperature Control (OTC)
Adjustable digital over temperature control, factory installed on selected control consoles with “B” designation; see chart. Protects furnace and load in the event of primary control circuit failure. Overrides main controller, assumes temperature control and shuts off power to furnace if high limit is reached. Manual re-set required for safety. Operates via magnetic contacts through signal from independent thermocouple.

Optional RS485 Digital Communications Port
RS485 Digital communications port available as an option. Allows controller to be connected to a PC for remote monitoring and control of the furnace. Up to 30 units can be connected to one PC. Please see page 35 for ordering information and additional options.

 

Model Digital With Programmer With Overtemp Control Volts, Hz Maximum Amps Exterior Dimen. H x F-B x W in” Ship Weight lbs
CC58114C     208/240V, 50/60 Hz 30 10" x 19 x 14" 35
With Programmer
CC58114PC   208/240V, 50/60 Hz 30 10" x 19 x 14" 35
With Overtemp Control
CC58114BC   208/240V, 50/60 Hz 30 10" x 19 x 14" 35
CC58114PBC 208/240V, 50/60 Hz 30 10" x 19 x 14" 40

 


Contact One Of Our Sales Representative Today
to inquire about a quote from Pacific Combustion or call us today at 800.342.4442


Competitive Pricing

Personalized Service

Fast Response Times