Lindberg 1500 °C Box Furnaces, Independent Control

Model BF51333C Box Furnace is constructed with rugged firebrick insulation for stability, silicon carbide heating elements to maximize heat transfer, insulating door plug and swing-down door for convenience and safety

1500° Box Furnace, Brick Sidewall Composition, Temperature Range 500°C to 1500°C

Model Indp. Controller Electrical Watts Interior Dim. WxF-BxH in” Exterior Dim. WxF-BxH in” Ship Weight
BF51333C CC58125C 208/240V,
50/60Hz
5900 6x12x5" 25x29x26" 440

NOTE: Required power cord and interconnecting wiring are not included. Fitted hearth plate protects interior from spills. Type “R” thermocouple integrated into chamber back wall, top. Includes 10" compensated thermocouple lead wire and polarized plug.

CONTROLLERS

Optional RS485 Digital Communications Port

  • RS485 Digital communications port available as an option. Allows controller to be connected to a PC for remote monitoring and control of the furnace. Up to 30 units can be connected to one PC. Please see page 35 for ordering information and additional options

1500°C Digital, Single Set Point Controller

  • Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack. Includes microprocessor-based PID control (proportional, integral, derivative), single segment, single set point, 1 ramp to set point. Built-in adjustable high limit over temperature protection. Simultaneous LED display of actual temperature vs. set point. May be configured to display temperature in either °C or °F.

Option P 1500°C Digital Single Program, Multiple Segment Programmable Controller

  • Control console includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack. Includes microprocessor-based PID control (proportional, integral, derivative), single program with multiple segments for ramp (up and down) and dwell (timed hold) temperature control. See Page 35 for more information. Built-in adjustable high limit over temperature protection. Simultaneous LED display of actual temperature vs. set point. May be configured to display temperature in either °C or °F.

Option B Over Temperature Control (OTC)

  • Adjustable digital over temperature control, factory installed on selected control consoles with “B” designation; see chart. Protects furnace and load in the event of primary control circuit failure. Overrides main controller, assumes temperature control and shuts off power to furnace if high limit is reached. Manual re-set required for safety. Operates via magnetic contacts through signal from independent thermocouple.
Model Digital w/ Programmer w/ Overtemp Control Electrical Amps Ext. Dimensions HxF-BxW in” Ship Weight lbs
CC58125C     208/240V, 50/60 Hz 60 10" x 19" x 14" 35
CC58125BC   208/240V, 50/60 Hz 60 10" x 19" x 14" 35
CC58125PC   208/240V, 50/60 Hz 60 10" x 19" x 14" 35
CC58125PBC 208/240V, 50/60 Hz 60 10" x 19" x 14" 35

Contact One Of Our Sales Representative Today
to inquire about a quote from Pacific Combustion or call us today at 800.342.4442


Competitive Pricing

Personalized Service

Fast Response Times