Lindberg products courtesy of Pacific Combustion

LINDBERG/BLUE M

Call or email us for assistance

FURNACES

TUBE FURNACES

1500°C HEAVY DUTY TUBE FURNACES (INDEPENDENT CONTROL)

Three Zone Controllers

CC58475C 1500°C Three Zone Controller - Option One
Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jacks for each zone. Includes three microprocessor-based PID controls (proportional, integral, derivative), single set point, 1 ramp to set point. Built-in adjustable high limit over temperature protection. Simultaneous LED display of actual temperature vs. set point. May be configured to display temperature in either °C or °F.

Model	Digital	With Programmer	With Overtemp Control	Electrical	Amps	Exterior Dimensions H x F-B x W in"	Ship Weight lbs
CC58475C				208/240V, 50/60 Hz	30/60/30	17" x 21" x 17"	70
CC58485C				208/240V, 50/60 Hz	60/120/60	17" x 21" x 24"	80

1500°C Three Zone 16 Segment One Programmable Controller - Option Two

Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jacks for each zone.

Center Zone
One microprocessor-based PID programmable control (proportional, integral, derivative), 1 program of 16 segments for ramps (up and down) and dwells (timed holds). Built-in adjustable high limit over temperature protection. Simultaneous LED display of actual temperature vs. set point.

End Zones
Two microprocessor-based PID control (proportional, integral, derivative), single segment, single set point which mimic the programmed profile of the center zone controller, but allow an offset up to 100°C. Offset is LED displayed.

Option B Over Temperature Control (OTC)
Adjustable digital over temperature control, factory installed on selected control consoles with "B" designation; see chart. Protects furnace and load in the event of primary control circuit failure. Overrides main controller, assumes temperature control and shuts off power to furnace if high limit is reached. Manual re-set required for safety. Operates via magnetic contacts through signal from independent thermocouple.

Optional RS485 Digital Communications Port

RS-485 communications port available as an option. Allows controller to be connected to a PC for remote monitoring and control of the furnace. Up to 30 units can be connected to one PC.

Model	Digital	With Programmer	With Overtemp Control	Electrical	Amps	Exterior Dimen. H x F-B x W in"	Ship Weight lbs
CC58475PC				208/240V, 50/60 Hz	30/60/30	17" x 21" x 17"	70
CC58485PC				208/240V, 50/60 Hz	60/120/60	17" x 21" x 24"	80
CC58475PBC				208/240V, 50/60 Hz	30/60/30	17" x 21" x 17"	80
CC58485PBC				208/240V, 50/60 Hz	60/120/60	17" x 21" x 24"	90

1500°C Three Zone 16 Segment Three Programmable Controllers - Option Three
Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jacks for each zone. Includes three microprocessor-based PID programmable controllers (proportional, integral, derivative), with 1 program of 16 segments for ramp (up and down) and dwells (timed holds). Built-in adjustable high limit over temperature protection. Simultaneous LED display of actual temperature vs. set point. May be configured to display temperature in either °C or °F.

Model	Digital	With Programmer	With Overtemp Control	Electrical	Amps	Exterior Dimen. H x F-B x W in"	Ship Weight lbs
CC584753PBC				208/240V, 50/60 Hz	30/60/30	17" x 21" x 17"	80
CC584853PBC				208/240V, 50/60 Hz	60/120/60	17" x 21" x 24"	90

Back to 1500°C Heavy Duty Tube Furnaces

Back to top

Call us today. We won’t make you wait for the future.